Agan"
Semoga sehat selalu bro...
Lnjut topik...
Kali ini kita akan membagikan kernel nokia n900
Ok
Sebenar nya nokia n900 ini bisa pasang 3 kernel sekaigus
Ntar ane share di mari... Kalo ada waktu luang ye 😁
Ini mh barangkali ada yg membutuh kan file ny (kp52)
Sedot aja di bawah
Info
 | 2013-04-18 , 11:58 |
Posts: 2,151 | Thanked: 8,459 times | Joined on May 2010 | #1 |
Finally kernel-power version v52 is now in Extras!
Update (from old version):
Use Hildon Application Manager or via apt-get. If you have Multiboot installed look bellow.
Installation:
From Hildon Application Manager install package: Linux kernel for power user
Or via apt-get package: kernel-power-flasher
Multiboot support (dropped):
Multiboot support for kernel-power was dropped because Multiboot damaging internal nand memory. If you are going to upgrade from kernel-power v51 to v52, first uninstall Multiboot and (optionally) switch to U-Boot. Then upgrade to kernel-power v52. Otherwise you can have problems and full reflash will be needed (due to Multiboot which damaging Maemo system).
Overclock support (optional):
From Hildon Application Manager install package: Linux kernel for power user (settings and overclock)
Or via apt-get package: kernel-power-settings
U-Boot support (optional):
From Hildon Application Manager install packages: U-Boot with kernel 2.6.28-omap1 and Linux kernel for power user (boot image for U-Boot)
Or via apt-get packages: u-boot-flasher and kernel-power-bootimg
Make sure you accept flashing U-Boot!
Packet injection wifi driver:
Kernel modules are already included and installed in /opt/packet-injection-modules/2.6.28.10-power52/
To load/unload it use shell script: http://atrey.karlin.mff.cuni.cz/~pal...t-injection.sh
BME replacement support:
This kernel has support for BME replacement (open source battery management). Will be announced...
New USB host mode:
This kernel has support for new usb host mode package USB Mode version 1.0-4. More info in this thread.
Uninstallation:
Overclock support or Bootimg package can be uninstalled via Hildon Application Manager or via apt-get. Uninstalling kernel itself is possible only via menu entry "Nokia Kernel". NEVER UNINSTALL KERNEL POWER PACKAGES!!! IT CAN MAKE YOUR DEVICE UNBOOTABLE.
===
Changelog:
kernel-power (1:2.6.28-10power52) fremantle; urgency=low
* Backport upstream patch: udf-use-hw-sector-size.diff (This fix UDF FS support on SD cards and USB disks)
* Update bq2415x_charger patch: (use kstrtol, use dev_dbg, call sysfs_notify, rename N900 charger to bq24150a, fix reporting bad values, disable charging when charger disconnected, report errors)
* Added patch kstrtol.diff which define macro kstrtol as strict_strtol
* Update into about kernel-power-bootimg package
* Package kernel-power-bootimg does not provide any features
* Enable more netfilter and ipv6 modules
* Added driver rx51_battery which export battery temperature, design capacity and voltage to sysfs, provides: kernel-feature-rx51-battery
* Added patch tif_restore_sigmask-syscalls-arm.patch which fix pselect bug, added provides: kernel-feature-sigmask
* Enable bridge module, provides kernel-feature-bridge
* bq27x00_battery: Do not report nominal available capaciy if battery is not calibrated
* Add sysfs entry hostdevice2 which show host device speed detected by musb_virthub.c
* Optify bootimg package
* Enable vlan (8021q) module
* Fix reporting temperature in rx51_battery driver (driver should export temperature in 1/10 °C)
* Add support for offline mode in bq2415x_charger driver
-- Pali Rohár <hidden> Thu, 14 Feb 2013 17:34:58 +0100
===
For questions about development, bugs, etc... write to thread
[Development] kernel-power on http://talk.maemo.org/showthread.php?t=78371
Here is also information how to compile kernel, send patches, ...
Last edited by pali; 2020-10-02 at 23:19.
Update (from old version):
Use Hildon Application Manager or via apt-get. If you have Multiboot installed look bellow.
Installation:
From Hildon Application Manager install package: Linux kernel for power user
Or via apt-get package: kernel-power-flasher
Multiboot support (dropped):
Multiboot support for kernel-power was dropped because Multiboot damaging internal nand memory. If you are going to upgrade from kernel-power v51 to v52, first uninstall Multiboot and (optionally) switch to U-Boot. Then upgrade to kernel-power v52. Otherwise you can have problems and full reflash will be needed (due to Multiboot which damaging Maemo system).
Overclock support (optional):
From Hildon Application Manager install package: Linux kernel for power user (settings and overclock)
Or via apt-get package: kernel-power-settings
U-Boot support (optional):
From Hildon Application Manager install packages: U-Boot with kernel 2.6.28-omap1 and Linux kernel for power user (boot image for U-Boot)
Or via apt-get packages: u-boot-flasher and kernel-power-bootimg
Make sure you accept flashing U-Boot!
Packet injection wifi driver:
Kernel modules are already included and installed in /opt/packet-injection-modules/2.6.28.10-power52/
To load/unload it use shell script: http://atrey.karlin.mff.cuni.cz/~pal...t-injection.sh
BME replacement support:
This kernel has support for BME replacement (open source battery management). Will be announced...
New USB host mode:
This kernel has support for new usb host mode package USB Mode version 1.0-4. More info in this thread.
Uninstallation:
Overclock support or Bootimg package can be uninstalled via Hildon Application Manager or via apt-get. Uninstalling kernel itself is possible only via menu entry "Nokia Kernel". NEVER UNINSTALL KERNEL POWER PACKAGES!!! IT CAN MAKE YOUR DEVICE UNBOOTABLE.
===
Changelog:
kernel-power (1:2.6.28-10power52) fremantle; urgency=low
* Backport upstream patch: udf-use-hw-sector-size.diff (This fix UDF FS support on SD cards and USB disks)
* Update bq2415x_charger patch: (use kstrtol, use dev_dbg, call sysfs_notify, rename N900 charger to bq24150a, fix reporting bad values, disable charging when charger disconnected, report errors)
* Added patch kstrtol.diff which define macro kstrtol as strict_strtol
* Update into about kernel-power-bootimg package
* Package kernel-power-bootimg does not provide any features
* Enable more netfilter and ipv6 modules
* Added driver rx51_battery which export battery temperature, design capacity and voltage to sysfs, provides: kernel-feature-rx51-battery
* Added patch tif_restore_sigmask-syscalls-arm.patch which fix pselect bug, added provides: kernel-feature-sigmask
* Enable bridge module, provides kernel-feature-bridge
* bq27x00_battery: Do not report nominal available capaciy if battery is not calibrated
* Add sysfs entry hostdevice2 which show host device speed detected by musb_virthub.c
* Optify bootimg package
* Enable vlan (8021q) module
* Fix reporting temperature in rx51_battery driver (driver should export temperature in 1/10 °C)
* Add support for offline mode in bq2415x_charger driver
-- Pali Rohár <hidden> Thu, 14 Feb 2013 17:34:58 +0100
===
For questions about development, bugs, etc... write to thread
[Development] kernel-power on http://talk.maemo.org/showthread.php?t=78371
Here is also information how to compile kernel, send patches, ...
Last edited by pali; 2020-10-02 at 23:19.
Tidak ada komentar:
Posting Komentar